Baptistry Heaters

Poolside Circulation Heater

The ChurchRite Poolside Heater is a circulation heater that includes the heating unit, a submersible water pump, and two 15 foot water hoses. The unit is designed to pump water through one hose out of the pool and into the heater, then the water is pushed back out and into the baptistry at a heated temperature. The heating unit is portable and placed outside of the baptistry, the water pump is submerged into the water, plugged into the heater and the heater is plugged into an electrical outlet (built in GFCI included in heater), the hoses are connected between the pump and heater and the circulation of water can begin.

A temperature knob allows for thermostat setting and the on/off switch features an indicator light for easy use. The 120 volt model is designed to heat baptistries with up to 150 gallon water capacity and the 240 volt model is designed to heat baptistries with up to 750 gallon water capacity. The ChurchRite Poolside Heater includes a one year, limited manufacturer’s warranty.


  • $469.00 (120V Model)
  • $499.00 (240V Model)


FREE Shipping

Additional Information

For optimal heating, a baptistry cover is strongly recommended during the heating process. We offer custom sized, insultated spa-style baptistry covers. Learn more by clicking here

Click here to view a PDF version of baptistry heater information and instruction

You can also visit our Brochures and Downloads page for a printable/downloadable PDF version as well as customer forms and PDFs/downloads for additional products. Go to page

ChurchRite Product Warranty

ChurchRite warrants to purchaser that products shall be free of defects in workmanship or materials for ONE (1) YEAR from the original purchase date; however, ChurchRite’s sole obligation under this warranty shall consist of repairing or replacing, free of charge (F.O.B. its factory), any product received prepaid at its factory within ONE (1) YEAR from the date of purchase and determined by ChurchRite upon inspection to be defective. The misuse, misapplication or failure to follow operational directions of any ChurchRite product, or the use of any heater without the presence of adequate water in the baptistry, will void the warranty.

No product shall be returned without the express written approval of ChurchRite.

No other warranty, express or implied, as to description, quality, merchantability, fitness for a particular purpose, or any other matter is given by ChurchRite in connection herewith. The selection, application, suitability for corrosion resistance or use for any purpose, are purchaser’s sole responsibility. Under no circumstance shall ChurchRite be liable for loss of use, profits or any other direct or indirect costs, expenses, losses or damages arising out of defects in or failure of the product or any part thereof. Always remove all electrical components prior to touch the water.

Heater Return Information

Before returning a heater you must first obtain a Return Authorization Number (RA). Items returned without the proper authorization number may be refused upon delivery. Items returned to the factory will be evaluated and tested.

  • Defective Items
  • If the cause is due to a manufacturer’s defect, the item will repaired or replaced.

  • Non-Defective items:
  • in the event the tests prove that the cause is not due to a manufacturer’s defect then charges will be incurred, such as the evaluation fee ($150) and return shipping ($25). If the item is repairable, you can choose to have it repaired and the evaluation fee will be waived, then you will only pay for repairs and return shipping.

    The returns process can take approximately 2 – 3 weeks. Items which have been improperly wired, modified or operated without water are not considered defective and are not covered under warranty. If you need an immediate replacement please contact us to order a new heater.

    If your original heater is found to be defective and can be repaired, no credit will be given for the new heater. A credit will only be given if the heater cannot be repaired by the factory. Note: If you have a heater with a GFCI (ground fault circuit breaker) please follow the reset instructions below.

GFCI Model Instructions

Instructions for plug-in models with GFCI built in

  • Plug unit into the power receptacle
  • Press the reset button on the GFCI, then press the reset button on the heater (visual indicator appears)
  • Press the Test Button (visual indicator disappears)
  • Press the Reset button again for use and turn the thermostat up

Get Your RA Number

Click Here To Fill Out Form


We offer FREE standard shipping on Baptistry Heaters to the continental US. For shipping to locations outside of the continental US please contact a member of our Church Furniture Consultation Team

Questions about this baptistry heater? We can help