Baptistry Heaters

The Electric Immersion Baptistry Heater is available with either a 240V plug or 120V plug attached. This portable immersion heater is our most economical. The heater is mounted over the side of the baptistery with a stainless steel bracket (provided), or can be suspended in middle or end of pool. Simply plug the pigtail cord into a 120 / 240 volt outlet, and set the thermostat to the desired temperature. No cutting or modification to existing baptistery. Completely automatic and portable using 60� power cord (Included).

A Stainless Steel mounting bracket is supplied for easy mounting. High-limit cut off switch is set at 125 degrees. The Immersion section of the unit is made of �Incoloy� or Stainless Steel. All heat is confined to the formed horizontal section for optimum efficiency. Cold riser extends to the top of container where control housing is located. A 3-Conductor cord set with polarized plug included. Adjustable vapor-proof thermostat control with range from 55 to 115 degree F.

No contractors required. Indicator light and on-off switch indicate when desired temperature is reached and breaks circuit when element is not in use. UL listed. Must be used in minimum 24" water. One year warranty.

We offer the Immersion Heater in both 120v and 240v.

Download the Heater brochure

Immersion Water Heater

The 240V heater will heat 60 Gallons per hour to a 40 degree rise. A 750 - 1000 gallon tank will heat in 13 - 17 hours. If you select the 120V model, the heater will operate at 120 volts and power will be reduced to 1.5 KW and will heat 15 GPH to 40 degree rise. Allow 18-24 hours to heat your portable baptistry

Basic Circulation Water Heaters 6 KW - 240V

Baptistry Heaters

Basic Circulation Water Heaters

The Basic Circulation Water Heater Kit includes the 6 KW heater with adjustable thermostat and high-limit protection, along with the pump to circulate water and installation kit. This has been the standard heater style in use for over 50 years, and is still a favorite. This style attaches directly to the side of your baptistry. Water comes in at the bottom, is heated, and pumped out at the top. (tub must be filled before using). Block under heater for support.

One Year Manufacturer's Warranty.

CR6KW - 001 - Kit Price

$479.00

Free Shipping to 48 States

SAVE ELECTRICITY!

Our New Poolside Baptistry Heater

allows for water circulation as the

water is heated, and uses 30% LESS ELECTRICITY than traditional heaters! Not for continuous use.

Learn More

Contact Information:

Church Furniture Store

1746 South Main Street

Rocky Mount, VA 24151

Phone: 540-483-9000

Toll Free: 1-800-639-7397

Fax: 540-484-4915

Email CFS

Click Here to get a Free Quote

Heater Return Policy

New! ChurchRite Deluxe Circulation Water Heaters

The ChurchRite 240 V Circulation Heater features an stainless steel housing (no rust), a 1/2 HP pump motor, and thermostat control. Available in 5.5 KW and 11 KW sizes. The 5.5 will heat the average 500 gallon baptistry in 6 hours by 30 degrees F. The 11 KW will heat the same baptistry by 36 degrees F in about 4 hours. Can be installed up to 12 feet from baptistry. Heating indicator light. Adjustable thermostat.

GFCI included.

Air button On/Off switch. Receptacle for the optional Auto/Fill Drain Unit. Easy assembly required. One Year Ltd. Manufacturer's Warranty

Prices:

CR6000 = $629.00 total

CR6005 = $729.00 total

Free Shipping to 48 States!

GFCI is built into each CR Model above

Dimensions 30"w x 13" High

Assembly Instructions

Product Features

Owners Manual

Download Heater brochure